BMW N54 N55 Port Injection Kit + Meth or Nitrous option
This product is currently sold out.
*In stock and ready to ship
MMP has the best, lightest, and most cost effective port injection kit on the market for your E-series N54, or N55 engine. Works on any model series with those engines.
This is the ONLY PI kit that also gives you additional 1/8" npt port to run either direct port meth or nitrous!
Material: The port plate and rail is made from Aluminum 6061 T6. The tie plates are made from stainless steel as well as all stainless steel hardware.
kit includes 6 flow matched 57lb injectors (600cc)
Benefits of this kit over other kits on the market
- Half the price of other kits
- Includes 1/8" NPT ports on each port for your choice of meth injection or nitrous injection if you so choose. It is supplied with 1/8" NPT plugs so you dont have to use at all, just nice to have options, right :)
- Optimized to save weight. Alot lighter than other kits on the market at under 2.5 lbs including EVERYTHING!
- Works with N54 or N55 e series car engines (not f series)
For this kit I sell the optional Splitsec AIC6 controller. This controllers works with any tune and is highly recommended as it is not married to a tune like the JB4 controller is. I dont sell the JB4 controller as it is too restrictive in its application. This controller works beautifully with flash only MHD tune where as the JB4 controller doesn't. This controller can be used with any car too in the future, it is not just for BMW cars. If you dont want to use my controller (splitsec) for this kit you are free to use ANY controller you want including the JB4, AEM, Haltech, Syvecs and it is PLUG AND PLAY, so dont worry it will work perfectly if you want to use a different controller or your own controller.
Let me be clear to avoid email questions and confusion. If you want this for use with the JB4 PI controller, it works 100% plug and play just buy the controller direct from BMS which they sell on thief website here for $299 http://burgertuning.com/N54_secondary_fuel_line_adapter_fuel_Injectors_BMW.html i don't sell it myself but you can by it there and it 100% works plug and play.
This Port injection kit can support over 1000whp on straight e85
the limitation is the LPFP
- with stage 2 LPFP
- on e85 - 600whp
- on e50 - 650whp
- with stage 3 LPFP
- on e85 - 900 whp (with fuel line upgrade and 1:1 regulator)
- with stage 4
- on e85 - 1000whp+
It up to you to interpolate other hp per pump per mixture, Please dont email me asking what it would be for your combination,
- (6) 600cc fuel injectors
- (1) Aluminum 6061T6 port injection plate
- (1) Aluminum 6061T6 0.5in ID fuel rail
- (2) stainless steel tie plates
- (1) E85 compatible fuel hose
- (2) Aluminum 6061T6 6AN ORB plugs for fuel rail
- (1) 6AN ORB x barb fuel line adapter
- (1) Fuel line Tee with OEM quick connect female x male x barb
- (2) Fuel line clamps
- (8) Stainless steel ¼” bolts for tie plates
- (7) M7 bolts for intake manifold installation
- (6) Silicone High temp head port gaskets for port injection plate
- this is EVERYTHING NEEDED for a perfect installation of the MMP port injection kit, nothing else is needed,
How to adapt for methanol injection through fuel rail and injectors
This kit also works with methanol line connected to the fuel rail and using the fuel injectors to control direct port methanol injection. IN order to do so you need to buy the following two fitting to adapt the 1/4" nylon meth tube to the fuel rail connection. No big deal and save a bundle compared to the competition.
- SplitSec AIC6 port injection controller and injector harness
- Precision Raceworks Stage 3, dual 450 E85 walbro made to fit the stock fuel bucket, Low Pressure Fuel Pump (LPFP)
- or Precision Raceworks Stage 2, single 450 E85 walbro made to fit the stock fuel bucket, Low Pressure Fuel Pump (LPFP)
Here is the link to the install guide