CLEARANCE - BMW N54 N55 Gen 1 Port Injection Kit + Meth or Nitrous option - Without Injectors

MMP Engineering

$ 199.00 was $ 600.00

  • CLEARANCE - BMW N54 N55 Gen 1 Port Injection Kit + Meth or Nitrous option - Without Injectors
  • CLEARANCE - BMW N54 N55 Gen 1 Port Injection Kit + Meth or Nitrous option - Without Injectors
  • CLEARANCE - BMW N54 N55 Gen 1 Port Injection Kit + Meth or Nitrous option - Without Injectors
  • CLEARANCE - BMW N54 N55 Gen 1 Port Injection Kit + Meth or Nitrous option - Without Injectors
  • CLEARANCE - BMW N54 N55 Gen 1 Port Injection Kit + Meth or Nitrous option - Without Injectors

This product is currently sold out.

*In stock and ready to ship

This kit includes everything you see in the pictures but it does not come with injectors at this cost or the Splitsec controller.  You wont find a better deal on the machined and kit parts for a port injection kit anywhere right now but here.  If you find a better deal for a new one let me know and I will beat it.

any injectors with same size (length/oring size) as these bosch injectors will work in this kit, 0280158051, 45lb/min (450cc) .  These are basically the short EV6/EV14 bosch injectors.

You can also buy these injectors in the link below for $300 for the set of 6

https://www.eospeed.com/collections/bmw-products/products/n54-intake-manifold-injector-kit - advertised at 52lb/min (550cc) at 43psi but actually at 72psi our N54 LP system runs at it would be 72lb/min (750cc)

or you can buy these below for $350

https://www.eospeed.com/products/n54-manifold-high-flow-injector-kit - 72lb/min (750cc) at 43psi but actually at 72psi our N54 LP system runs at it would be 100lb/min (1050cc)

 

MMP has the best, lightest, and most cost effective port injection kit on the market for your E-series N54, or N55 engine.  Works on any model series with those engines.

This is the ONLY PI kit that also gives you additional 1/8" npt port to run either direct port meth or nitrous!

Material: The port plate and rail is made from Aluminum 6061 T6.  The tie plates are made from stainless steel as well as all stainless steel hardware.

Benefits of this kit over other kits on the market

  1. Half the price of other kits
  2. Includes 1/8" NPT ports on each port for your choice of meth injection or nitrous injection if you so choose.  It is supplied with 1/8" NPT plugs so you dont have to use at all, just nice to have options, right :)
  3. Optimized to save weight.  Alot lighter than other kits on the market at under 2.5 lbs including EVERYTHING!
  4. Works with N54 or N55 e series car engines (not f series)

For this kit I sell the optional Splitsec AIC6 controller.  This controllers works with any tune and is highly recommended as it is not married to a tune like the JB4 controller is.  I dont sell the JB4 controller as it is too restrictive in its application. This controller works beautifully with flash only MHD tune where as the JB4 controller doesn't.  This controller can be used with any car too in the future, it is not just for BMW cars.  If you dont want to use my controller (splitsec) for this kit you are free to use ANY controller you want including the JB4, AEM, Haltech, Syvecs and it is PLUG AND PLAY, so dont worry it will work perfectly if you want to use a different controller or your own controller. 

 

Kit includes:

  • (1) Aluminum 6061T6 port injection plate
  • (1) Aluminum 6061T6 0.5in ID fuel rail
  • (2) stainless steel tie plates
  • (1) E85 compatible fuel hose
  • (2) Aluminum 6061T6 6AN ORB plugs for fuel rail
  • (1) 6AN ORB x barb fuel line adapter
  • (1) Fuel line Tee with OEM quick connect female x male x barb
  • (8) Stainless steel ¼” bolts for tie plates
  • (7) M7 bolts for intake manifold installation
  • (6) Silicone High temp head port gaskets for port injection plate
  • this is EVERYTHING NEEDED for a perfect installation of the MMP port injection kit, nothing else is needed,

 

How to adapt for methanol injection through fuel rail and injectors

This kit also works with methanol line connected to the fuel rail and using the fuel injectors to control direct port methanol injection.  IN order to do so you need to buy the following two fitting to adapt the 1/4" nylon meth tube to the fuel rail connection.  No big deal and save a bundle compared to the competition.

AN6 ORB x 1/8" NPT (click for link)

1/4" nylon tube x 1/8" npt (click for link)

 

    Optional:

    • SplitSec AIC6 port injection controller and injector harness

     

     

    Share this

    Pin Post Plus

    Similar Products